How to change Security code to station ?

[eyal1975]

Hi
i configured feature access code : change security code
but when i enter the access code in the phone (*40) i get error tone that i have no permission to change it.
where is the configuration need to allowed this access code ?

thanks alot
Eyal

 

[n00benduser]

This was taken from the elmodocs


Station Security Codes provide security to station users by preventing other users
from accessing functions associated with the user’s station. Each station user can
change his or her own SSC if the user knows the station’s current settings. You
must create a system-wide SSC change Feature Access Code (FAC) that users
can invoke to change their SSC. You must also administer and provide their
individual SSCs to users. A user cannot change a blank SSC.
To create a system-wide SSC change Feature Access Code (FAC) at the System
Administration Terminal:
1. Type change feature-access-codes and press Enter.
The Feature Access Code screen appears.
2. Press Next Page.
The Feature Access Code screen page 2 appears.
3. Type a code valid for your Dial Plan (i.e. #5) in the Station Security
Code Change Access Code field. This sets the access codes for this
feature.
4. Press Enter or Submit, depending on your terminal.
The Command prompt appears.
5. Type change system-parameters security and press Enter.
The Security-Related System Parameters screen appears.
6. Press Next Page to advance to page 2 of the Security-Related System
Parameters screen.
7. Type a number in the Minimum Station Security Code Length field
that is based on your Dial Plan and press Enter. This determines the
minimum required length of the Station Security Code. Longer codes are
more secure.

 

[eyal1975]

thanks alot for your answer..

but when i enter the access code from the station
i got an error tone
i also trace the station and i got message : change security dont allowed"

any idea ???

Eyal cohen

 

[pthom]

Did you finally find a solution to your problem?

I ve the same problem and it works only when I dial the change SSC FAC through telecommputing access.

Thom.