how to change a phone model from m3902 to m3901 meridian opcion 11c

[ferfevisa]

i try to change model of a phone ( meridian opcion 11c ), from m3901 to m3902. then i delete dn of the phone m3901 with ld20, later i tried with ld20 add a new phone with the new phone model, but something goes wrong, and the new phone do not work propertly. can anyone help me ?

 

[dabble]

You will need to completely remove the TN then enter it as a new TN with the model you actually want. You can't change the model with a CHG prompt. Need to OUT then NEW.

 

[PERRYPJ]

You need to OUT the 3901 and then do a NEW on the 3902

OLD ROLMEN WORKING ON NORTELS AND AVAYA

 

[ferfevisa]

i ask an apology by advance by my english is not to good, but thank you so much for help me.

Well i delete the number with this instruction
ld 20
req out
type 3902
tn 011 0 00 00

then i tried to do this
ld 20
req new
type 3902

but i do something worng because the phone do not work, the line is dead.
can you help me again

best regards

 

[ferfevisa]

i have doubt about the commands when i tried to add the new phone, if you can help me too with this thank you !!

 

[bhassell2000]

are you programing the line on key 0 and all of the othe rfeatures? Do you have another 3901 to look at the programming?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[ferfevisa]

yes bhassell2000 i have another 3901 dn at the programming

 

[cmawbey]

use the copy command

LD 20
req CPY 1
type 3901
cftn ( copy from TN ) this is the tn of an existing 3901 set
tn 11 0 0 0
dn xxxx

try that

 

[GHTROUT]

ld 20
req out
type 3902
tn 011 0 00 00

then i tried to do this
ld 20
req new
type 3902

I thought you wanted to build a 3901?

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[ferfevisa]

rigth now the line is dead, sine i use the
ld 20
req out
tn 011 0 00 00

do not have tone. So i want to add a new from the begining, can anyone give me one example to do this,
Thanks a lot

 

[GHTROUT]

The best way to learn is just hit enter at every prompt that allows you to pass it by, then the ones you get stuck on, look in these books:

http://www.ghtrout.com/micromerl/index.html

When you are done, print the phone out and compare it to another one.

Go back and CHG what you feel needs changing.

This guide is also helpful:

http://www.ghtrout.com/files/Meridian_1_Basic_System_Admin_.zip

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[ferfevisa]

Thanks to all the problem was solved. my mistake was i do not put nothing in the feature KEY when add the new DN, because i didnt know the meaning of this feature, but rigth now the phone is work correctly. specially thanks to bhassell2000 and to all of you



a learn a little bit