Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to block incoming number Call Mgr 8.6.2 w/SIP

Status
Not open for further replies.

johnpi

Technical User
Oct 30, 2009
33
US
Hello,

I have been asked to block a specific phone number from calling into our system. The documentation I've found is for older versions and only talks about blocking inbound calls if you have MGCP or H.323 but we have SIP and are running version 8.6.2. I'm thinking it might be done with translation patterns. Any help is appreciated, thanks.
 
It's done on the Gateway Router(s) using translation rules

Caveat: I've never done it using SIP trunks, nut only because we do not use SIP. In theory it's doable. The process is explained in the CVOICE course as well as in the available aftermarket documentation.

Also a good article on it here:
https://supportforums.cisco.com/docs/DOC-19628


Original MUG/NAMU Charter Member
 
Thanks for all of your help. It is now working. Had to make new partitions, CSSs, and then translation patterns to match the numbers to block. Calls to be blocked are sent to a partition that can't go anywhere while all others are passed through.
 
Thanks John. I just figured that out myself today. Amazing what you can find by surfing the net :)

Original MUG/NAMU Charter Member
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top