How to assign passcode for L500 type analog phone for outgoung calls

[Mohamed]

Hi biddies,
I am new to this forum and highly appreciate the answer for the below question.
One of my client using CS1000 and they have L500 type analog phones. The have a class of service for outgoing landline numbers. For few extensions, they want to assign pass code for these analog phones in case of any outgoing calls for landline numbers.
Please suggest your valuable ideas and solutions on this request

Thanks
Nif

 

[Firebird Scrambler]

The first thing is to set the required analogue phone to be restricted by having CLS = TLD and NCOS = the number that is set for restricted calls.

The next thing is to read the attached files that I've uploaded in the link below. Although it was written many years ago for a very old release, most of the settings and prompts will still be OK to use and follow.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

 

[Mohamed]

Fire...
Thank you for the document. As I'm a newbie to this system, could you please assist me to accomplish this? I have webt through your document and bit confused how to start and where to start.
What my exact requirement is, I have one analog (L500 type) phone which has outgoing facility to landline numbers (NCOS 3). I want to configure this phone such like a passcode to be entered before taking a call to landline inorder to avoid unwantd outgoing calls.
Please advise step by step

 

[Firebird Scrambler]

You need to log in via a TTY port and follow the instructions. More information on programming is attached.

Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com