How to add/update CRN0 table

[Sccoppa]

Hi Everyone,
I have a number of ACDN's NCFW'd to external numbers. Five ACDN's have been set up for some years and worked fine. I have recently changed three ACDN's with new NCFW entries. Those three ACDN's ring fast busy now. The only way I can have sets access the ACDN is to unrestrict NCOS of two phone set for users that access those numbers. It looks like I need to add to my CRN0 table to allow these new numbers to pass without the unrestritcted NCOS. How do I add to the CRNO table under the allow entry?
Thanks all

 

[Firebird Scrambler]

It's best to go into LD 49 and print off the FCR tables to see which ones your extensions are using.

Use the "CHG" command to allow or deny entries etc.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[Sccoppa]

Great thanks!!
I was able to add a number of entries.

Now how do I remove entries no longer required? Should I just enter an existing entry under the DENY prompt?

Thanks again.

 

[Firebird Scrambler]

In LD 49

do e.g.

REQ CHG
TYPE IDC
CUST 0
DCNO 1
IDGT 2222
2222 X
IDGT C/R

That should do the trick!.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.