HOW to ADD a code (RNAA) of FFC..?

[tyro03]

Hi everyone, I have this little problem (which I can´t solve), a user asked me about this feature of Ring Again, I know that you add it in the LD 57, but I don´t know the correct procedure. Here is what I get:


>ld 57
FFC000
MEM AVAIL: (U/P): 1116069 USED U P: 174302 85884 TOT: 1376255
DISK RECS AVAIL: 418
REQ new
TYPE ffc
CUST 0
SCH8897
CUST
SCH0274
CUST ****

I don´t know how to add a specific Feature (RNAA) (RNAD) and one of my questions is, if is possible to put the same code to both, or why not? and once I had add it, how could I erase the code, becuase I´m still learning and I wouldn´t like to make a BIG trouble with this FFC.

Thanks in advance.

 

[cmawbey]

you use CHG not NEW to add

Adding a New Flexible Feature Code

A code for any FFC can be added using Program 57.

The following example shows a new "Ring Again Activation Code (RGAA)" of #66 being added.

LD 57
Load Program 57.

REQ CHG Change
TYPE FFC Flexible Feature Code
CUST 0
FFCT
CODE RGAA
RGAA #66
RGAA Carriage return back to the REQ prompt



Colin

 

[cmawbey]

Deleting a Flexible Feature Code

Use Program 57 to delete an FFC.

The following example shows a "Ring Again Activation Code (RGAA)" of #31
being deleted:-

LD 57
Load Program 57.

REQ OUT Delete a code
TYPE FFC
CUST 0
ALL No
CODE RGAA
RGAA #31
RGAA Carriage return back to the REQ prompt

Changing a Flexible Feature Code

To change an FFC delete the existing code and then add the new code.



Colin