How to access PDM (GUI) of PIX 501 ? 1

[johnpau80]

I'm completely new to this networking stuff.

We have a small network and CISCO PIX 501 is installed in our
network. Some of our old n/w guys installed it for us and
gave us the telnet passwords to access the PIX 501.

We have both the telnet passwords and are able to access the
CISCO PIX 501 using telnet session. Since I'm not familiar
with the telnet commands and all then read the doc about
PIX 501 and it said that it has the PDM GUI to access the
firewall.

And in the doc it asked me to access the pix 501 using

https://cisco_pix_ipaddress

(thru internet explorer).

But when i type in that it asks for some username and password, I'm not sure what username/password I had to give. As for the telnet i'm just giving passwords.

Any clue as what USERNAME & PASSWORDS I need to type in.
Its asking me 2-3 times and I did try some and it says authorization failed.

Any help !!


--Thanks
SAM

 

[martinp05]

hello,

try this two ones:

1) leave the username-flied blank
2) username: pix

martin

----------------------------------
Martin Peinsipp, Austria
CCSA,
IT-Security-Administrator

 

[johnpau80]

Martin,

Leaving the username blank and my password( had to give it
twice worked).

Thanks very much

--Sam