how programming fax on pri and asm8 2

[ewick777]

I have a fax machine has a link asm8 module on a 400 bcm
I have a pri and did a fax to this but when I get a fax is ok
when another fax between the client expects a ringtone instead of occupation
how busy tone

 

[bluemr2]

If I'm understanding correctly you need to know how a second call to your fax machine needs to get a busy signal? Make the target line if busy set to busy tone.

 

[ewick777]

yes but i have 3 fax on the same number and i want tone busy if 3 fax busy

 

[bluemr2]

You would need to set up a hunt group. Assign the 3 fax extensions as members, set mode as sequential, assign the target line to the hunt group, then set 'if busy' to busy tone.

 

[norstarboy125]

bluemr2 i have to give you a star just for understanding that one...

 

[ewick777]

Merci beaucoup des renseignements C'est super juste de reussir de me traduire


Thanks a lot!

 

[bluemr2]

I travel around the world a lot and don't speak anything but english, so i've gotten pretty good at understanding broken english. Ewick, your english is much better than my french but, je vous en prie. (I think)