How not to do it !!!

[RCorrigan]

A Client of mine was having a connection issue with a pc - either not connecting or running at 10Mbps

I finally got the in-house guy to show me the cable start and end points and then got him to admit there was a join !!!!

OK so far till I saw the join ..... Arghhhhhhhhhhh

<Do I need A Signature or will an X do?>

 

[JcBWF]

better you than me....I'd have top smack somebody. 'Course I usually feel like doing that at work anyway

Perfection is expected, Excellence is Tolerated

 

[buitenhek]

LoL OMG HS NW
And it actually worked sometimes!

Regards
Peter Buitenhek
ProfitDeveloper.com

 

[RMGBELGIUM]

omg, the guy responsible should get the electric chair !

 

[CTCINY]

Whoever did that should have all there tools taken away and not returned until they apologize to all telephone techs worldwide

What doesn't kill you only makes you stronger.

 

[CTCINY]

Excuse me i meant cabling techs

What doesn't kill you only makes you stronger.

 

[mikeydidit]

Here is what our network group think the closet should look like.

[URL unfurl="true"]http://www.geocities.com/mikeydidit2007/MVC-013F.JPG [/url]


This is what it looked like when I got through with it

[URL unfurl="true"]http://www.geocities.com/mikeydidit2007/123.JPG [url/]

Hell, there are no rules here - we're trying to accomplish something.
Thomas A. Edison

For the best response to a question, read faq690-6594

 

[Dexman]

Mike's group did an excellent job cleaning up that telephone closet

If it ain't broke, I haven't fixed it yet.

 

[Dexman]

For the very first picture, I'm thinking a public flogging for whoever wired that mess would be appropriate.

If it ain't broke, I haven't fixed it yet.

 

[willzer]

LOL!! That is epic.

------------------------------------------
"Chicks dig geeks."

 

[franklin97355]

mikeydidit, so you cleaned out the junk in the closet and added a few velcro straps. I don't see a change to the telco wiring and there is no lan left at all. Sorry if I don't understand.

The answer is "42"

 

[jeffmoss26]

The switch is up high on the left side. It's out of the picture.

jeff moss

 

[dnc16]

I like telling them they should have have used Cat 5e marrettes!... and then they ask how much they cost! LOL

 

[jerryreeve]

Hey The 66 blocks I get come with a cover that states that they are Cat5 ?

----------------------------
JerryReeve
Communication Systems Int'l
com-sys.com

 

[Dexman]

It can be done. The thing to remember is to keep the twists as intact as much as possible. When punching the wires down to the pins, "tips" and "rings" will enter the block together. The tip will be fed up to the pin above while the ring is fed down to the pin below. I know my wording may be somewhat vague, but I'm not sure how to better explain it.

If it ain't broke, I haven't fixed it yet.