how many E1 support for each release?

[tissot1853]

hi,

anyone could tell me how many E1 for each release? not max, may usually used

R8=
R9=
R11=
CM2 DEFINITY=
CM2 s8300=
CM2 S8500=
CM2 S8700=

thanks

qiavaya^gmail^com
s8700/s8500/s8400/definity/ip-office

 

[4merAvaya]

The number of T-1/E-1 circuits that a switch can support is more dependant on the Port Network capacity. There are 241 available talk paths in a Port Network (8 E-1 circuits). You can monitor Port network capacity by using the 'list measurements load-balance' reports.

Kevin

http://support.avaya.com/elmodocs2/definity/def_r10_new/233505_3/233505_3.pdf

 

[tissot1853]

So if i upgrade my CM2 definity,

now, 300 analog user 8*E1
upgrade, 600 analog user 18*E1

How to setup, I don't want upgrade S8500 or S8710, could i setup new pn by TN570C?

Thanks

qiavaya^gmail^com
s8700/s8500/s8400/definity/ip-office

 

[nohuhu]

tissot1853,

you won't get more capacity per port network by upgrading, it's still the same 242 two-way talkpaths per port network. you could add more epns, however.
as for new epn, you can do it with fiber optic link if you find some used boards and cabinets. they're end of sale since june so you can't buy them new.

 

[tissot1853]

i only add TN570C or TN570D, right?

qiavaya^gmail^com
s8700/s8500/s8400/definity/ip-office

 

[nohuhu]

tissot1853,

not that simple. you can have up to three port networks in direct connect configuration, means every to every. if you need more than three port networks, you have to use center stage switch to interconnect them. css is a special kind of a shelf mounted in mcc cabinets. i has gone out of sale with these cabinets as well...

 

[tissot1853]

Thanks for dwalin,
I know what you mean, And i only add one epn, So only add two TN570 for each.

And does Lucent TN570C support CM2 definity?

qiavaya^gmail^com
s8700/s8500/s8400/definity/ip-office

 

[nohuhu]

tissot1853,

yes, in direct connect configuration you should use two tn570 boards for each epn. but there's a limit of total 3 port networks connected like this.

afaik you need to replace tn570c with tn570d when upgrading to cm2 or cm3. look up the circuit pack compatibility matrix on the support.avaya.com.