How it dial a call???

[minicompbx]

Hello,
I would like to know where on the TN is configured to tell the TN what to dial.

I did a TRAC and was able to find out where it goes.. But one thing I do not understand is that where on the TN that say that what to dial or where it should go???

And also, it is a elevator phone, I have only one button to press.

I am planing to use FTR HOT but I really want to understand the configuration of the TN actual

Below config of TN

CDEN 4D
CUST 0 
MRT 
ERL 00000 
WRLS NO
DN   1234 30     MARP
     CPND 
       NAME HELLO, BOB

       XPLN 27 
       DISPLAY_FMT FIRST,LAST
AST  NO  
IAPG 0 
HUNT 
TGAR 2 
LDN  NO
NCOS 1 
SGRP 0 
RNPG 0 
LNRS 32 
XLST 0 
SCI  0 
CLS  CTD DTN FBD XFA WTA THFD FND HTD ONS 
     LPR XRA AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LNA TVD 
     CFTD SFD MRD C6D CNID CLBD AUTU
     ICDD CDMD LLCN EHTD MCTD 
     GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND 
     MBXD CPFA CPTA DDGA NAMA MIND 
     MCRD 
     EXR0 SHL ABDD CFHD 
     CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC 
     CDMR PRED MCDD T87D SBMD PKCH MPTD
PLEV 02 
PUID 
AACS NO
MLWU_LANG 0 
FTR  PHD 
FTR  RDL 32

Thank you

Learning is not enough, you have to apply it...

 

[KCFLHRC]

Usually those buttons in the elevators are connected to auto dialers and the elevator company programs them. Hot D is for manual line operation, like a ring down. Typically not the set up with a button in the elevator.

 

[minicompbx]

So that's mean that the company setup on the elevator to dial the extension. I have to contact them to know how they setup it...

And a FTR HOT D is it a good idea to put on the elevator.

Thank you

Learning is not enough, you have to apply it...

 

[KCFLHRC]

Yes, contact the elevator company. It's not that it's a bad idea but with their programming and your programming together it may not work.

 

[Funk49]

We actually use the HOT DEST and have our analog TN(s) ring down to our 911 Emergency Operators. Otis elevators have the older 'Janus' phone boards that can be programmed via DTMF codes including their ring down target, enabling prerecorded message announcements like "Elevator Emergency, Pres 1 to Talk or Press 2 for location", etc. We asked them to allow our PBX to handle the ring down. Like KFC stated, you need to work those details out with your elevator provider.