Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How install latest version.

Status
Not open for further replies.

ipec

Vendor
Feb 19, 2008
8
BR
Hi,
My current version is
------------------------------------
* X450a-24t.1 # show version
show version
Switch : 800152-00-05 0743G-80610 Rev 5.0 BootROM: 1.0.2.2 IMG: 11.5.2.10
XGM2-1 :

Image : ExtremeWare XOS version 11.5.2.10 v1152b10 by release-manager
on Thu Oct 26 09:53:04 PDT 2006
BootROM : 1.0.2.2
------------------------------------
Where achieve the current version? "XOS version 12"
My tftp is not working, how do?
tftp: send: Network is unreachable

Thanks
 
Could you post the output from the command:
Code:
show switch
 
* X450a-24t.31 # show switch

SysName: X450a-24t
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: 00:04:96:34:75:45

SysHealth check: Enabled (Normal)
Recovery Mode: All
System Watchdog: Enabled

Current Time: Fri Feb 22 20:53:27 2008
Timezone: [Auto DST Disabled] GMT Offset: 0 minutes, name is UTC.
Boot Time: Thu Feb 21 19:19:54 2008
Boot Count: 33
Next Reboot: None scheduled


Current State: OPERATIONAL
Image Selected: primary
Image Booted: primary
Primary ver: 11.5.2.10
Secondary ver: 11.5.2.10

Config Selected: primary20.cfg
Config Booted: primary20.cfg

primary20.cfg Created by ExtremeWare XOS version 11.5.2.10
99374 bytes saved on Thu Feb 21 04:03:06 2008
*
 
At the <System Prompt> #

Code:
download image x.x.x.x <filename.xos> vr-default primary

where x.x.x.x is replaced by the IP address of the TFTP server and <filename.xos> is replaced by the name of the image that you wish to use. You can also replace "primary" with "secondary" if you wish to use that partition.

Read the release notes for the image that you wish to use so that you can avoid any unexpected issues.

Press <enter> and follow the prompts.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top