how i create a new range of extension

[eskpology]

hi

The client have 8 pbx merlin legend and 3 definity.In the a pbx definity the cliente create a new range the extension and wants that the merlin can call the new range the extension in the definity.

I was to do the change but no i can not. the manual that i have is release 6.1 and the merlin legens is 1.4 v2.0 and no show the opcion UDP Table.

I need that you say to how i can doing or manual the merlin legen release 1.4 v2.0.

 

[merlinman]

The Release 1 does not support Uniform Dial Plan (UDP).

I would replace it with a Release 7.0. That gives a great many more features and provides a back up to Flash Card feature as well.

http://home.comcast.net/~merlinman

 

[eskpology]

Hi Friend i think that but actuality the 8 merling legend are conecting and i can call the a merling legend in Bolivar city in venezuela to Caracas city in venezuela and in caracas it has a pbx definity and between then they realise calls.

how they make calls between then without UDP.

Merlin---to--- Definity--- ?
Merlin---to--- Merlin----?
Definity-to--- Definity--- UDP

Merlin 1.4

Thank

 

[merlinman]

Well, Yo no se DEFINITY, but perhaps it is emulating TIE LINES. That would be my guess.

Can you print the T1 and TRUNK data from the LEGEND?

http://home.comcast.net/~merlinman

 

[eskpology]

Hi

No, i can not. The merlin are in other cities. I him ask to the client did who it. but you say how make the configuration for communicate the merlins.

 

[merlinman]

You should be able to dial in remotely with WINSPM.

http://home.comcast.net/~merlinman

 

[merlinman]

Check the site below for more info.

http://home.comcast.net/~merlinman