How I can make my hex2 to work under linux

[astronomyLinux]

Hi I have Pentagram Hex2, under windows it's ok, but under Linux I have with kppp "NO CARRIER" ??? help me pleas

this is my configuration files
Suse Linux 9.1 2.6.4-52-default
Linuxant Driver hsfmodem-6.03.00lnxt04061800full_k2.6.4_52_default-1suse.i586.rpm
kppp version 2.1.4 (Using KDE 3.2.1)

DEVICE
Modem device /dev/modem
Flow control Hardware [CRTSCTS]
Linetermination CR
Connection speed 57600
Modem timeout 60sec

MODEM
Wait for dial tone befre dialing on
Busy wait 5sec

MISC
pppd vercion 2.4.2
pppd timeout 60sec

Terminal commands:
ATZ
OK
ATDTxxx
CONNECT 57600

User Access Verification

Username: xxx
Password:

Authentication Successful.

This line may not run PPP.
NO CARRIER

kppprc:
[General]
DefaultAccount=
NumberOfAccounts=0
PPPDebug=0
pppdTimeout=60

[Graph]
Background=255,255,255
Enabled=true
InBytes=0,0,255
OutBytes=255,0,0
Text=0,0,0

[Modem]
AnswerResponse=CONNECT
AnswerString=ATA
BusyResponse=BUSY
BusyWait=5
ConnectResponse=CONNECT
DLPResponse=DIGITAL LINE DETECTED
DialString=ATDT
Enter=CR
EscapeGuardTime=150
EscapeResponse=OK
EscapeString=+++
FlowControl=Hardware [CRTSCTS]
HangUpResponse=OK
HangupString=+++ATH
InitDelay=50
InitResponse=OK
InitString=ATZ
InitString1=
NoCarrierResponse=NO CARRIER
NoDialToneDetection=ATX3
NoDialToneResp=NO DIALTONE
PreInitDelay=50
RingResponse=RING
Speed=57600
ToneDuration=70
VolumeHigh=M1L3
VolumeMedium=M1L1
VolumeOff=M0L0

Current parameters: ("hsfconfig --info")

Config for modem unit 0: /dev/ttySHSF0
Device instance: xxx
HW revision : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: xxx
Registration ID: xxx
License owner : xxx
License key : FREE
License status : FREE (max 14.4kbps data only)
Current region : POLAND (T.35 code: 008A)

 

[mattjurado]

Okay, so this is a european device based on what I am reading, but is basically a conexant pci modem.

Have you contacted the manufacturer to see if they provide any drivers for Linux? Do they support Linux?

Did SuSE automatically detect this modem when you installed it (or did SuSE install this driver when you installed SuSE)?

Did you have to run YAST to find this modem?

This looks like a winmodem, it may not work.

Matt J.

Please always take the time to backup any and all data before performing any actions suggested for ANY problem, regardless of how minor a change it might seem. Also test the backup to make sure it is intact.

 

[astronomyLinux]

this driver is from linuxant.com - the original driver under linux. Suse did not detect my modem until I installed this *.rpm. And yes this is an winmodem, but it works very good with previous versions of this distros.

Mandrake knows what it is, but he "sad" , that this modem i supported only with 2.4x kernel.