astronomyLinux
Technical User
Hi I have Pentagram Hex2, under windows it's ok, but under Linux I have with kppp "NO CARRIER" ??? help me pleas
this is my configuration files
Suse Linux 9.1 2.6.4-52-default
Linuxant Driver hsfmodem-6.03.00lnxt04061800full_k2.6.4_52_default-1suse.i586.rpm
kppp version 2.1.4 (Using KDE 3.2.1)
DEVICE
Modem device /dev/modem
Flow control Hardware [CRTSCTS]
Linetermination CR
Connection speed 57600
Modem timeout 60sec
MODEM
Wait for dial tone befre dialing on
Busy wait 5sec
MISC
pppd vercion 2.4.2
pppd timeout 60sec
Terminal commands:
ATZ
OK
ATDTxxx
CONNECT 57600
User Access Verification
Username: xxx
Password:
Authentication Successful.
This line may not run PPP.
NO CARRIER
kppprc:
[General]
DefaultAccount=
NumberOfAccounts=0
PPPDebug=0
pppdTimeout=60
[Graph]
Background=255,255,255
Enabled=true
InBytes=0,0,255
OutBytes=255,0,0
Text=0,0,0
[Modem]
AnswerResponse=CONNECT
AnswerString=ATA
BusyResponse=BUSY
BusyWait=5
ConnectResponse=CONNECT
DLPResponse=DIGITAL LINE DETECTED
DialString=ATDT
Enter=CR
EscapeGuardTime=150
EscapeResponse=OK
EscapeString=+++
FlowControl=Hardware [CRTSCTS]
HangUpResponse=OK
HangupString=+++ATH
InitDelay=50
InitResponse=OK
InitString=ATZ
InitString1=
NoCarrierResponse=NO CARRIER
NoDialToneDetection=ATX3
NoDialToneResp=NO DIALTONE
PreInitDelay=50
RingResponse=RING
Speed=57600
ToneDuration=70
VolumeHigh=M1L3
VolumeMedium=M1L1
VolumeOff=M0L0
Current parameters: ("hsfconfig --info")
Config for modem unit 0: /dev/ttySHSF0
Device instance: xxx
HW revision : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: xxx
Registration ID: xxx
License owner : xxx
License key : FREE
License status : FREE (max 14.4kbps data only)
Current region : POLAND (T.35 code: 008A)
this is my configuration files
Suse Linux 9.1 2.6.4-52-default
Linuxant Driver hsfmodem-6.03.00lnxt04061800full_k2.6.4_52_default-1suse.i586.rpm
kppp version 2.1.4 (Using KDE 3.2.1)
DEVICE
Modem device /dev/modem
Flow control Hardware [CRTSCTS]
Linetermination CR
Connection speed 57600
Modem timeout 60sec
MODEM
Wait for dial tone befre dialing on
Busy wait 5sec
MISC
pppd vercion 2.4.2
pppd timeout 60sec
Terminal commands:
ATZ
OK
ATDTxxx
CONNECT 57600
User Access Verification
Username: xxx
Password:
Authentication Successful.
This line may not run PPP.
NO CARRIER
kppprc:
[General]
DefaultAccount=
NumberOfAccounts=0
PPPDebug=0
pppdTimeout=60
[Graph]
Background=255,255,255
Enabled=true
InBytes=0,0,255
OutBytes=255,0,0
Text=0,0,0
[Modem]
AnswerResponse=CONNECT
AnswerString=ATA
BusyResponse=BUSY
BusyWait=5
ConnectResponse=CONNECT
DLPResponse=DIGITAL LINE DETECTED
DialString=ATDT
Enter=CR
EscapeGuardTime=150
EscapeResponse=OK
EscapeString=+++
FlowControl=Hardware [CRTSCTS]
HangUpResponse=OK
HangupString=+++ATH
InitDelay=50
InitResponse=OK
InitString=ATZ
InitString1=
NoCarrierResponse=NO CARRIER
NoDialToneDetection=ATX3
NoDialToneResp=NO DIALTONE
PreInitDelay=50
RingResponse=RING
Speed=57600
ToneDuration=70
VolumeHigh=M1L3
VolumeMedium=M1L1
VolumeOff=M0L0
Current parameters: ("hsfconfig --info")
Config for modem unit 0: /dev/ttySHSF0
Device instance: xxx
HW revision : Basic2 2.18 Standard DAA 3VoltsIA
HW profile name: xxx
Registration ID: xxx
License owner : xxx
License key : FREE
License status : FREE (max 14.4kbps data only)
Current region : POLAND (T.35 code: 008A)