How enable call progress messages to be sent from Nortel to Avaya

[Kickersport]

Nortel and Avaya link via T1

Nortel isn't passing call progress messages back to the IP Office so it has no indication how the call is progressing. So when a call is sent from the Avaya to the Nortel even after the call is connected, it is still not showing as connected on the Avaya side

Can someone brief me on how to implement this.

 

[allenmac]

Is there a particular reason why you are connecting via T1 and not PRI?

 

[Kickersport]

My bad, I am connecting via a PRI...The calls goes through on the Nortel ---> the Avaya; but not going through from the Avaya --> the Nortel. I look at the Nortel while the call was coming over this is what I am seeing
---------------------------------------------------------

DCH 7 IMSG REL COMP REF 00008002 CH 1 23 TOD 21:22:16VAIL: 419RTE AVAIL: 2500
TMDI D-CHANNELS AVAIL:
CAUSE :INVALID CALL REF VALUE 02434 USED: 66 TOT

DCH 7 IMSG REL COMP REF 00000002 TOD 21:22:209 USED: 1 TOT: 80TN 001 12 R
CAUSE :NORMAL UNSPECIFIEDI U
AML AVAIL: 15

 

[allenmac]

Those messages look very garbled.

But the first fragment seems to indicate that the Avaya is sending something that the Nortel is not recognizing, causing the call to be terminated.

 

[johnpoole]

post the pri

john poole
bellsouth business
columbia,sc

 

[johnpoole]

you can ld 96 stat serv enl serv... i don't think that will clear this problen,, i assume that your lcnt table is clear

john poole
bellsouth business
columbia,sc