How do you set default extension?

[AndrewJones]

I have a V3000 BRI with 4 ISDN lines and 11 numbers. When you dial one of the numbers the AA picks up the call. How do I set the default extension to be a hunt group (4001) rather than the AA on 501?

I have tried setting the ISDN BRI group and ISDN BRI channel auto extension to be 4001 for open, closed, lunch & other but the AA still answers the call.

I have worked around the problem by setting up a dial plan to map all 11 numbers to extension 4001 but I no longer get the benifit of time-based system mode changes.

6.0.44 btw

Andrew

 

[AndrewJones]

After further reading I'm guessing the default Table 2 rules are sending the calls to the AA as all my DDI numbers have a 5 in them.

If I use a table 2 like this:=

TableEntry Create 2 1 0 1 1 Internal 0 0
TableEntry Create 2 2 1 1 1 Internal 0 0
TableEntry Create 2 3 2 1 1 Internal 0 0
TableEntry Create 2 4 3 1 1 Internal 0 0
TableEntry Create 2 5 4 1 1 Internal 0 0
TableEntry Create 2 6 5 1 1 Internal 0 0
TableEntry Create 2 7 6 1 1 Internal 0 0
TableEntry Create 2 8 7 1 1 Internal 0 0
TableEntry Create 2 9 8 1 1 Internal 0 0
TableEntry Create 2 10 9 1 1 Internal 0 0

Will this accept calls on any DDI number and then use the Auto Extension setup on the ISDN channel or group?

 

[othammo]

You will have to set up timed routes in your dial plan.