How do you print disabled TN's?

[JonnyBravo1]

How do you print disabled TN's on an Option 11c? I've only got threee available digital ports and I want to see if any ports are programmed but not being used.

 

[acewarlock]

LD 20
LDIS 0 Main Cabinet
LDIS 1 Cab 2
LDIS 2 Cab 3
LDIS 3 Cab 4

 

[EddieDuece]

Another way to find out if there any unused ports programmed is to got to LD 32 and IDU the TN.

>ld 32
NPR000
.idu 11 3

ARIES TN 011 0 00 03
TN ID CODE: M2008
NT CODE: NT9K08AA
COLOR CODE: 35
RLS CODE: 05
SER NUM: D6191D
.
This is a used port, so leave as is. Below is a TN with no device plugged into the port, so you could use TN 8.12.

.idu 8 12

NPR501
.

 

[JonnyBravo1]

These are disabled ports, not just un-configured ports, right? If I use:
ld 11
luvu
type: 2000

That tells me the available ports already.

 

[EddieDuece]

That is correct.

 

[johnpoole]

a quick check i use is ld 117 inv generate midnight... then anytime i want i can 117 inv prt sets.. that shows me the idu of every digital set in the switch.. it also insures the actual set maatches the as built.. for smaller systems you can do a stat for the card and catch phones that are disabled.. but that can be programed around.. the ld 117 finds missing phones even if they are not disabled

john poole
bellsouth business
columbia,sc

 

[jamie2]

Those are unconfigured porst... Will not list disabled ports.

 

[jamie2]

That was for JohnyBravo's post, not JP's

 

[EddieDuece]

Go with JP's method. I always forget that one, but it is the best practice.

 

[johnpoole]

thanks

john poole
bellsouth business
columbia,sc

 

[EddieDuece]

And once again, I misread your reply Bravo....luvu gives unconfigered or unused ports, not disabled ports.

 

[JonnyBravo1]

Thanks guys!

 

[JonnyBravo1]

What are the actual commands in ld 117? My manual only goes up to ld 97.

 

[EddieDuece]

LD 117 (return)
OAM000

> inv prt sets
Set inventory:
14 8 2006 15 46 7, 14 8 2006 15 59 12, 638
3904, 004 0 02 00, M3904 NTMN03EA 70 03 085E8E, AUDIT , 3993
3904, 004 0 02 01, M3904 NTMN03EA 70 03 085C0F, AUDIT , 3980
3904, 004 0 02 02, M3904 NTMN03EA 70 03 085C6E, AUDIT , 3992
3904, 004 0 02 03, M3904 NTMN03EA 70 02 0396B7, AUDIT , 3981
3904, 004 0 02 04, M3904 NTMN03EA 70 03 085E3A, AUDIT , 3990
3903, 004 0 02 05, M3903 NTMN12EA 70 07 09A6BD, ASSESS, 6415
3903, 004 0 02 06, M3903 NTMN12EA 70 07 099D0D, FINSVC, 6219
3903, 004 0 02 07, M3903 NTMN12EA 70 07 09E810, DSDREV, 7218
3903, 004 0 02 08, M3903 NTMN12EA 70 07 09A074, FINSVC, 6464
3903, 004 0 02 09, M3903 NTMN12EA 70 07 1305F4, FINSVC, 6211
3903, 004 0 02 10, M3903 NTMN12EA 70 07 09A938, FINSVC, 6646
3903, 004 0 02 11, M3903 NTMN12EA 70 07 09F0A5, CLERK , 4439
3903, 004 0 02 12, M3903 NTMN12EA 70 07 09A5AD, AUDIT , 2940
3903, 004 0 02 13, M3903 NTMN12EA 70 07 09E69D, WWM , 3119
3903, 004 0 02 14, M3903 NTMN12EA 70 07 09E7DE, SUCT , 5559
3903, 004 0 02 15, M3903 NTMN12EA 70 07 09F472, AUDIT , 6505
3903, 004 0 03 00, M3903 NTMN12EA 70 07 099BC4, FINSVC, 6224
3904, 004 0 03 01, M3904 NTMN03EA 70 02 031EFA, AUDIT , 3983
3904, 004 0 03 02, M3904 NTMN03EA 70 03 085DD1, AUDIT , 5408

 

[JonnyBravo1]

That's what I was afraid of. It tells me:
Sets file is non existent. Try again later.

 

[EddieDuece]

So you're on an option 11....as you stated!

>ld 32
NPR000
.stat 6
00 = UNIT 00 = DSBL (2008)<------Disabled unit
01 = UNIT 01 = IDLE (3903)
02 = UNIT 02 = IDLE (2008)
03 = UNIT 03 = IDLE (2008)
04 = UNIT 04 = IDLE (2008)
05 = UNIT 05 = IDLE (2008)
06 = UNIT 06 = IDLE (2008)
07 = UNIT 07 = IDLE (2008)
08 = UNIT 08 = IDLE (2008)
09 = UNIT 09 = IDLE (2008)
10 = UNIT 10 = IDLE (2008)
11 = UNIT 11 = IDLE (2008)
12 = UNIT 12 = IDLE (2008)
13 = UNIT 13 = IDLE (2008)
14 = UNIT 14 = IDLE (2008)
15 = UNIT 15 = IDLE (2008)
16 = UNIT 16 = UNEQ <---------------Unused Unit
17 = UNIT 17 = UNEQ
18 = UNIT 18 = UNEQ
19 = UNIT 19 = UNEQ
20 = UNIT 20 = UNEQ
21 = UNIT 21 = UNEQ
22 = UNIT 22 = UNEQ
23 = UNIT 23 = UNEQ
24 = UNIT 24 = UNEQ
25 = UNIT 25 = UNEQ
26 = UNIT 26 = UNEQ
27 = UNIT 27 = UNEQ
28 = UNIT 28 = UNEQ
29 = UNIT 29 = UNEQ
30 = UNIT 30 = UNEQ
31 = UNIT 31 = UNEQ

Hope this helps.

 

[acewarlock]

You have to do INV GEN SETS first then wait until it finish's before you can do INV PRT SETS

 

[speckledhen]

Don't forget the max TN limits of the card you will be using (norm 16). Eddie's example would have been using the 17th port.

 

[johnpoole]

if the 11 can get to 117

inv generate midnight,
then any day past that

ld 117
inv prt sets

you can't print the inv until you gerentate one...

john poole
bellsouth business
columbia,sc

 

[asodoma]

If he has the correct midnight routines running at night he can go into LD 22 and PRT, AHST, and that will show the TNs that are 'bad'. I usually run that in the morning to see what was going on while I was gone...