how do you move an entire superloop??

[nuevodia]

I need to move an entire superloop with all the TN's within to a diferent superloop.

It is an option 81c Rls. 25.30 appreciate your help

 

[Firebird Scrambler]

The first thing to do is to capture a list of all of your tn's on the Super loop to be removed. You will need to obtain programs that can compile new TN's for you. That will be the hardest part. Outing all the tn's should be easy using a script file with source data taken from the capture or another Overlay such as LD 83 etc.
Once that's done, then the superloop can be removed in LD 97. Check that you don't have a Trunks,Tie lines, (LD 14) XTD/DTR data (LD 13). Print off your SUPL & XPE data in LD 97 first.
This is by no means an easy & quick job to do. Preparation is most important thing to bear in mind & check that you have allowed enough time. As it's a Opt81, Then you could split the CPU & work on the off line CPU side.

 

[PERRYPJ]

FIREBIRD, I THINK HE OR SHE WAS LOOKING FOR A SIMPLE WAY OUT BUT YOU ARE TOTALLY CORRECT THERE IS NO EASY WAY

OLD ROLMEN WORKING ON NORTELS

 

[Firebird Scrambler]

Assuming that the other superloop is on a different IPE shelf, Then the MOV command would only be ok where there are no conflicts.
One problem is BFS keys on sets. You can't move a extn that is being monitored, unless you remove the BFS key first. There is also the problem of Symposium skill sets or non blocking ACD loops.
A lot has to be considered. I originally assumed that the existing superloop was being replaced with another one.
It's difficult to give out answers without knowing & understanding the nature of the question.

 

[OMARpr]

You can also go to LD25 and move a whole loop, with one drawback, if there are any UNIV TRK Cards, the lines must be erased because you can't move trk lines from one loop to another. Also if you have ACD sets programmed you can't use LD25. Other than that try it's fast and esay.

 

[nuevodia]

Thanks OmarPr for the info; I know that works because you were present when we did last Sunday.

 

[Firebird Scrambler]

Interesting point that LD 25. Is it safe to use for TN'S with BFS keys?. I'm always concerned about this kind of change on a Meridian.