How do you do a "loop all" on a CS1000E (Opt11)

[xJWLx]

How do you continuity test a CS1000E. "Loop all" does not work and neither does "shlf"?

 

[johnpoole]

the loop all command was built to test xops cards.. loop 0 for cab 0

john poole
bellsouth business
columbia,sc

 

[telebub]

On a small system (Option 11) you use TEST in Ld 30. Maybe that will work for a CS1000e.

War Eagle!
Lions Baseball '09!

 

[bigindian65]

ENCT sl
Enable automatic background continuity tests for a superloop

Mato' Was'aka

 

[bigindian65]

did you do SHLF l s Test loop l, shelf s. in 30? or did you just type shlf?

Mato' Was'aka

 

[GHTROUT]

It really is LD 30 .TEST

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[bigindian65]

small system yes, but not on an E

Small Systems, CS 1000S, MG 1000B, and MG 1000T commands

The following commands are applicable to Small Systems and CS 1000S
systems:


CDSP Clear the maintenance display on active CPU to 00 or blank
CMAJ Clear major alarm and reset power fail transfer
CMIN Clears minor alarm for all customers
CMIN ALL Clears minor alarm for all customers
END Abort current test
TEST Perform a continuity test and signaling test on Small System IPE shelf
UNTT c (u) Perform a signaling test on a specified card or unit

Mato' Was'aka

 

[xJWLx]

Yeah, I tried SHLF 0 1 and TEST and LOOP ALL. None seem to work now that it's a CS1000E. I'm just trying to audit unplugged ports.

 

[bigindian65]

if you are running 30 in midnites, why not just LDIS Loop Shelf in ld 32?

Mato' Was'aka

 

[GHTROUT]

Hmm, OK. Then LD135 .MIDN I guess Thanks.

To audit unplugged ports, you should use LD 137 INV commands

Does that work on the E?



[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[xJWLx]

.SHLF 0 0
IPMG LOOP
NWS961 000

.TEST 0 0
NWS002

.TEST 0
NWS002

.TEST
NWS002