How do you disable AutoClean on a L180 Library

[lunatir]

i am trying to disable autoclean on the L180 Library and have not been able to. i do know to enable it all you need to do is import a clean cartridge and reboot the library. i tried exporting the clean tape and rebooting the library and that did not work. i was unable to find the disable in the menu either

 

[TechyG]

did u try the L180 configuration menu? otherwise you must connect to the MPC card - CSE port...

 

[Japyw]

HI lunatir

Simply by removing all cleaning cartridges in slots under the CAP
(normally label are CLNUXX)closed the door and you can see on the display that autocleaning meu was disapeared.

Hope this post help you

 

[lunatir]

in the config it states disabled and all cleaning carts are removed. even with this it still tries to clean the drives and send messages to that effect to arcserve

 

[TekAndy]

Is autoclean enabled in your backup software?

 

[TechyG]

you must connect via the CSE port into the MCP card nad disable auto clean.