Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how do you connect MOH on the coral SL system
- Thread starter Gus63
- Start date
disturbedone
Vendor
It's been a while since I touched one but I believe there is a 3.5mm jack on the top near where the cables plug in to the cards. This will be the first MOH input. You can have others if you have additional resource cards.
Because this is the first input it should just start playing to all callers put on hold. It should also play as BGM (BackGround Music) if you dial a code on the phone.
If you had additional MOH sources then you could specify them as music sources for specific xtns, specific HUNT groups, or as BGM (to differ from MOH, eg have Music0 as MOH and Music1 as BGM).
Because this is the first input it should just start playing to all callers put on hold. It should also play as BGM (BackGround Music) if you dial a code on the phone.
If you had additional MOH sources then you could specify them as music sources for specific xtns, specific HUNT groups, or as BGM (to differ from MOH, eg have Music0 as MOH and Music1 as BGM).
- Thread starter
- #3
metballnut
Vendor
depends on the system you have....some do plug in like posted, but some use the y/s pair
- Status
Similar threads