How do remove a CDP TSC from LD 87? 2

[CalicoJack]

I have a paging code that I need to remove from all our Option 11C PBXs as well as our Option 61C.

Actually, I want to change it to go to a recorded message stating that this paging funtion is no longer available. I will settle for just deleting the reference, though.

Any help would be appreciated.

From Option 61C

LD 87

TSC 83
FLEN 2
ITOH NO
RLI 6

From Option 11C where the Paging Trunk is acually located
________________________________
Looking to see where the DN goes
________________________________
LD 20

DN 83
TYPE RDB
ROUT 8
__________________________________
Looked to see where the route goes
__________________________________
LD 21
TYPE RDB
CUST 00
DMOD
ROUT 8
DES PAG
TKTP PAG
NPID_TBL_NUM 0
NACC PGNU
ESN NO
VTRK NO
ICOG OGT
SRCH LIN
STEP
ACOD 83
TARG
CLEN 1
OABS
TIMR ICF 512
OGF 512
EOD 13952
DSI 34944
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3

IENB 5
TFD 120
SST 5 0
NEDC ETH
FEDC ORG
HOLD 02 02 40
SEIZ 02 02
RGFL 02 02
CDR YES
INC NO
LAST NO
QREC NO
OAL YES
AIA NO
OAN NO
OPD NO
CDRX NO
NATL YES
MUS NO
TTBL 0
OHTD NO
ALRM NO
ART 0
SGRP 0
AACR NO
______________________________________________________
Checked all PAG listed in LD 20 (should only have one)
______________________________________________________
LD 20
REQ: prt
TYPE: pag
TN
CUST
DATE
PAGE

DES PAGE
TN 010 0 00 06
TYPE PAG
CUST 0
XTRK XUT
TIMP 600
BIMP 3COM
RTMB 8 1
SIGL LDR
STRO IMM
SUPN YES
AST NO
IAPG 0
CLS UNR DTN WTA LPR THFD
P10 NTC
DATE NO DATE
______________________________________

So, can I just out DN 83 in LD 20 and recreate it to go to an actual phone, setup a voicemail box, etc? Or is there an easier or better way to do this? If I out the DN, what will happen when the other sites try to page using this code, will it have a fast busy or go to the new TN with the vm?

Thanks,
Jack

 

[telebub]

You would OUT the trunk in LD 14 1st. OUT the route in LD 16. Create a dummy ACD of 83 in LD 23 and point it to voice mail. Create your announcement in voice mail. Remove the TSC in LD 87 in the other switch and create it as a DSC. It will then route across to the announcement.

War Eagle!
Lions Baseball '09!

 

[bigindian65]

I'm glad you went thru all that telebub lol! *


Mato' Was'aka

 

[GHTROUT]

How to remove steering code:

Step 1. Post here
Step 2. Read answer.

It's that easy

~~~
[small] [©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators [/small]

 

[CalicoJack]

Thanks Telebub! I am cool with everything except the removal of the TSC in LD 87. How do you remove these things. I was going to use the OUT command in LD 87 and I stopped when I realized I was going to remove the entire data block. I know that there is something really simple here, but I am not aware of it.

Thanks,

Jack

 

[bigindian65]

I believe you would chg and x83 (i think)



Mato' Was'aka

 

[telebub]

It's just like OUTTING a DSC.

LD 87
REQ: OUT
CUST: 0
FEAT: CDP
TYPE: TSC
TSC: 83


War Eagle!
Lions Baseball '09!

 

[CalicoJack]

OK - I created the new acd pointing to my vm dn. Then I created an Announcement Service for it. For some reason it takes 9 seconds to get there once I dial the code. Any ideas?

REQ prt
TYPE acd
CUST 0
ACDN 83

TYPE ACD
CUST 0
ACDN 83
MWC NO
DSAC NO
MAXP 1
SDNB NO
BSCW NO
ISAP NO
AACQ NO
RGAI NO
ACAA NO
FRRT
SRRT
NRRT
FROA NO
NCFW 32000
FNCF NO
FORC NO
RTQT 0
SPCP NO
OBTN NO
RAO NO
CWTH 1
NCWL NO
BYTH 0
OVTH 2047
TOFT NONE
HPQ NO
OCN NO
OVDN
IFDN
OVBU LNK LNK LNK LNK
EMRT
MURT
RTPC NO
NRAC NO
RAGT 4
DURT 30
RSND 4
FCTH 20
CRQS 100
IVR NO
OBSC NO
OBPT 5
CWNT NONE

 

[CalicoJack]

Thanks again.
I created a test DSC at my headquarters pointing it to the remote location with the current paging trunk code.

Then I created an ACD with the same DN to point to our Meridian Mail box where I created an announcement service.

I figured out the 9 second thing....my FLEN was wrong.

Thanks for all the help!

- Jack

BTW - I was not able to remove a DSC using CHG and x83. The OUT DSC command above worked like a charm. I was leary to do it in the event I wiped out my entire CDP data. It didn't. Thanks again, Telebub!

 

[bigindian65]

Yeah I seen x wasnt gonna get it after i posted it sorry, telebub covered me, why I starred him.

Mato' Was'aka