Until now I've only had IP phones in my location and area code. Now I want to setup an IP phone in another state and area code. I setup the IP phone like I normally would, but gave it a local DID number. The phone acts like it's in my location. I can't dial a local number without dialing 1 and the area code.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I setup IP Phones in different area codes?
- Thread starter druble
- Start date
- Thread starter
- #3
Does the new IP phone have the correct IP address for the location, as defined in your ip-network-map and ip-network-region?
Susan
“Before you criticize someone, you should walk a mile in their shoes.
Then, when you criticize them, you are a mile away ...
and you have their shoes.”
Susan
“Before you criticize someone, you should walk a mile in their shoes.
Then, when you criticize them, you are a mile away ...
and you have their shoes.”
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question