I have a NETGEAR FVS318 and am trying to figure out how to set up an inbound VPN so I can access my home network when I'm out on the road, at a hotel, my office, etc. I have a cable modem with a dynamically assigned IP address and the NETGEAR FVS318 as the firewall. Everywhere I look for help with this shows how to configure a VPN FROM the NETGEAR FVS318 to everything else, but not an inbound PC to gateway VPN. Can someone please help me?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I Set up an inbound VPN on the NETGEAR FVS318
- Thread starter vib427
- Start date
The document from the following link describes how to do this.
In your case the 'main office LAN'-from the document, will be your home network.
Where the document refers to 'home network', this will be your travelling laptop.
Its 'easier'* if you use XP rather than W2K.
*see "NetGear FVS318 VPN to remote W2K client using IPSEC" thread!
- Darren
In your case the 'main office LAN'-from the document, will be your home network.
Where the document refers to 'home network', this will be your travelling laptop.
Its 'easier'* if you use XP rather than W2K.
*see "NetGear FVS318 VPN to remote W2K client using IPSEC" thread!
- Darren
- Status
Similar threads
- Question
- Locked
- Question