Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I set IP Helper address on x460-24p ? 1

Status
Not open for further replies.

rmiddleton

IS-IT--Management
Jan 27, 2012
5
US
sh ver
Switch : 800323-00-10 9999N-99999 Rev 10.0 BootROM: 2.0.1.7 IMG: 12.5.4.5
PSU-1 : PSSF751301A-13 800382-00-06 1303A-40103 Rev 0.0
PSU-2 :

Image : ExtremeXOS version 12.5.4.5 v1254b5 by release-manager
on Tue Jun 28 10:10:40 PDT 2011
BootROM : 2.0.1.7
Diagnostics : 2.10
 
After IP unicast routing has been configured, you can configure the switch to forward Dynamic Host
Configuration Protocol (DHCP) or BOOTP requests coming from clients on subnets being serviced by
the switch and going to hosts on different subnets. This feature can be used in various applications,
including DHCP services between Windows NT servers and clients running Windows 95.
To configure the relay function, follow these steps:
1 Configure VLANs and IP unicast routing.
2 Configure the addresses to which DHCP or BOOTP requests should be directed, using the following
command:
configure bootprelay add <ip_address>
3 Enable the DHCP or BOOTP relay function, using the following command:
enable bootprelay
Example
The following command enables the forwarding of BOOTP requests:
enable bootprelay

As for the list of commands, page 3177 in this pdf:
" The best way to predict the future, is to create it " - Peter Drucker
 
bootprelay, that was my "missing link"!
Thank you!!!
(BTW, PDF link doesn't seem to work, but I believe that command is what I need. Thanks!)
 
no prob :) glad i could help!

" The best way to predict the future, is to create it " - Peter Drucker
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top