How do I send number besides DN over tie 3

[3cross]

I can't get the CLID table to send a specific #. I can get it to add the area and office code I need but it always uses the phone DN. These are going over a tie then out a PRI at the other location.We are trying to use ext. 6133 on the outbound ID instead of the DN. Everything works but we can't get the DN replaced.

=========

ENTRY 1
HNTN aaa
ESA_HLCL
ESA_INHN NO
ESA_APDN NO
HLCL 6133
DIDN NO
HLOC aaaooo
LSC
CLASS_FMT DN

========

FEAT :CRID
FEAT :NCID
PROGRESS: CALL IS NOT END TO END ISDN
CALLING #:aaaoooxxx NUM PLAN: PRIVATE/RESERVED (LOC)
CALLED #:10131aaaoooxxxNUM PLAN: PRIVATE/NETWORK SPECIFIC (SPN)

 

[GHTROUT]

Here are some CLID guides:

http://www.ghtrout.com/ghtrout/files/CLID_Documentation_from_Nortel.zip

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[GHTROUT]

This is one of the tables that explains what each prompt is:

[tt]
REQ: CHG
TYPE: NET
TYPE NET_DATA
CUST 0
OPT
AC2
FNP
CLID YES < CLID Gate Opener
SIZE
INTL
ENTRY 0 < CLID Table to be modified/created
HNTN 972 < All Calls - NPA (Area Code)
ESA_HLCL 362 < Emergency Calls - NXX (Local Exchange)
ESA_INHN YES/NO < Emergency Calls - Include NPA on CLID
ESA_APDN YES/NO < Emergency Calls - Include DN on CLID
HLCL 362 < Normal Calls - NXX (Local Exchange)
DIDN YES/NO < Normal Calls - Include DN on CLID
HLOC 442 < UDP Calls - Home Location Code
LSC 2 < CDP Call - Local Steering Code (if used)
[/tt]

[&copy;] GHTROUT.com [&hArr;] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[GHTROUT]

You know, I think you might need to change the route from TIE to DID to get the CLID to send - I'm not certain.

TIE and DID are somewhat interchangeable - worth investigating in your scenario.

[&copy;] GHTROUT.com [&hArr;] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[zoomaster]

Not sure if I am answering the question but I'll give it a shot.

Create the scr key 0 XXXX D

— When the character "D" is entered, the
system searches the DN keys from key 0
and up, to find a DN key with a CLID table
entry. The CLID associated with the found
DN key is used.

This presumes your have scr 6133 on one of the buttons

 

[3cross]

I read the downloaded info and followed the first example. This was routing the calls out over a branch using NRS and in the SPN I needed to set CLTP to NATL. It was at none and the calls were treated as UDP or CDP calls and always used the ext. #.

Using element manager for making changes to the ESN is a lot easier since it shows all available prompts.

Thanks for the downloads and help Greg.

 

[Avaya911PLM]

Glad you liked my document. I think example 4.1.1.3 is what you were looking for.



--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast

 

[GHTROUT]

Yes, that's the best documentation I've seen for a while. Great job!



[&copy;] GHTROUT.com [&hArr;] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[Avaya911PLM]

Thanks Gene!

Coming from an old far.... er.. Seasoned veteran like yourself, that means a lot ;-)

--
Fletch

Nortel Emergency Services PLM

http://nortel.com/e911

Check out this month's E911 Talk podcast at Nortel E911 Talk Podcast

 

[GHTROUT]

As such, the file has been updated.

[&copy;] GHTROUT.com [&hArr;] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators