How do I reset MISP

[bungy43uk]

I have an error condition on my BRI card in L2 which shows APDB. I have DISC and ENLC the BRI (SILC) but no joy.
MISP is on LOOP 50 - ive DISL 50 and ENLL 50 but this still hasnt cleared the APDB condition. Have I done everything correct please?

 

[SL1M1]

Did the MISP perform a Self Test...What did it say ?
Refer to Basic Rate ISDN Interface Maintenance NTP process
to assist/help you determine the problem

Cheers!!

 

[bungy43uk]

MISP commands just hang....
Ive pulled the MISP on Loop 50 and final message from card reset was

SYS DSBL - SELFTESTS PASSED TO: ENBL

However when dissing and re-enabling the SILC card the error APDB in L2 is still present.

Stat on 50 shows bottom line of BRIL : MAN DSBL
This should show BRIL : ENBL

I cannot DISL 50 as the command just hangs - I want to dissable the card and FDL it but not having any of it im afraid...?

 

[bungy43uk]

Ive sorted it.
I had to dissable the application within the MISP
ie DISL BRIL 50 then re-enable in the same way - APDB condition then dissapeared and all is well.

Thanks all

Bungy