Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I reboot a BP250/50
- Thread starter gio0417
- Start date
hi,
on the bottom of cpu board there are 3 v.24 ports and a black connector with two holes and a led. Short circuit the holes on the black connector (mostly there is a special jumper for it and its connected to this connector from one of its legs) and restart your system. After restart your BP will turn to factory defaults, extensions from 200 and trunks from 700. Do not forget to plug out the short circuit after restart.
on the bottom of cpu board there are 3 v.24 ports and a black connector with two holes and a led. Short circuit the holes on the black connector (mostly there is a special jumper for it and its connected to this connector from one of its legs) and restart your system. After restart your BP will turn to factory defaults, extensions from 200 and trunks from 700. Do not forget to plug out the short circuit after restart.
- Status
Similar threads
