transistor
Technical User
- Feb 27, 2003
- 4
Can anyone tell me how I can make a Windows Me Startup Disc on a CD-R or CD-RW rather than a floppy.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I make a Startup disc on a CD-R 1
- Thread starter transistor
- Start date
- Status
-
1
- #3
- Thread starter
- #4
transistor
Technical User
- Feb 27, 2003
- 4
Kocky
Thanks. I tried to copy an existing Windows Me startup bootdisk with hidden and system files enabled. It all looked good on the CD, but unfortunately the disk didn't boot. You are on the right lines but, there must be something I was not doing quite right.
PAndersen
Thanks also. What a great site! Too much for me to take in in one go, but I did see the pointer to using a feature in Nero which produces a boot disk from an existing boot floppy. This is similar to the solution provided by Kocky, but must automatically include that little extra I needed.
Worked well and booted perfectly.
Thanks again to both of you
Regards
Dennis
Thanks. I tried to copy an existing Windows Me startup bootdisk with hidden and system files enabled. It all looked good on the CD, but unfortunately the disk didn't boot. You are on the right lines but, there must be something I was not doing quite right.
PAndersen
Thanks also. What a great site! Too much for me to take in in one go, but I did see the pointer to using a feature in Nero which produces a boot disk from an existing boot floppy. This is similar to the solution provided by Kocky, but must automatically include that little extra I needed.
Worked well and booted perfectly.
Thanks again to both of you
Regards
Dennis
- Status
Similar threads
- Locked
- Question