normandong
MIS
How do I install the SAP with CAP for Nortel phone set?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I install the SAP with CAP f
- Thread starter normandong
- Start date
- Status
I am not sure of exactly what you are looking for, but I hate it when I have to ask questions several times, so I will try to give you enough info here.
1) Most Norstar Systems do not require you to actually do any programming with respect to the addition of a CAP. It sees it automatically if you allow it to.
2) The SAP must be connected to the second pair (White/Orange) that is going to the jack where the reception telephone is.
3) The second pair must be properly connected to the second pair on the jack.
4) A two-pair flat-wire must be used between the jack and the CAP.
5) There should be a 6-wire flat-wire that you will connect between the CAP and the M7324 telephone.
Now, you should be running.
1) Most Norstar Systems do not require you to actually do any programming with respect to the addition of a CAP. It sees it automatically if you allow it to.
2) The SAP must be connected to the second pair (White/Orange) that is going to the jack where the reception telephone is.
3) The second pair must be properly connected to the second pair on the jack.
4) A two-pair flat-wire must be used between the jack and the CAP.
5) There should be a 6-wire flat-wire that you will connect between the CAP and the M7324 telephone.
Now, you should be running.
- Status
Similar threads
- Locked
- Question
- Locked
- Question