Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I get a number to ring on more than 2 keys on a 2008?

Status
Not open for further replies.

johnpi

Technical User
Oct 30, 2009
33
US
I've been asked to have 3 keys on a 2008 ring for one number. We set up all of our 2008's to have a line 2 that rings when the first line is busy. For instance key 0 will be extension 4123 and their key 1 will be 5123. I don't know how to give them a 3rd line for their extension. Is this done with a rollover number?
 
Make key 2 x6123 (or any available non-DID number) and change LHK prompt to 2.


 
or just program key0/key1/key2 as MCR keys with the same extension. I have seen that at some locations.
 
Thanks for the responses. Telebub, does it have to be keys 0, 1, 2 in a row like that? Because there is another number MARP'd on key 1. Key 6 and 7 are open but when I tried to put the non-DID numbers on them I get an error saying SCH3683
For 2X16 set, handsfree Class of Service is defined. Cannot assign key
15 as it is now a handsfree key."

This is a 2008 set. Here is the printout:

REQ: prt
TYPE: 2008


TN 0 1 7 12
DATE
PAGE
DES

DES PP
TN 000 1 07 12 VIRTUAL
TYPE 2008
CDEN 8D
CTYP XDLC
CUST 0
ERL 0
FDN 6340
TGAR 2
LDN NO
NCOS 4
SGRP 0
RNPG 10
SCI 0
SSU
LNRS 16
XLST
CLS CTD FBD WTA LPR PUA MTD FNA HTA ADD HFA
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXD ARHA FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND FLXD FTTC DNDY DNO3 MCBN
CDMR MCDD T87D PKCH
CPND_LANG ENG
RCO 0
HUNT 6340
LHK 7
LPK 1
PLEV 02
DANI NO
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 4766 0 MARP
CPND
NAME LAC DDX station 1
XPLN 27
DISPLAY_FMT FIRST,LAST
01 MCR 4750 0 MARP
02 TRN
03
04 RNP
05 CFW 4
06
07
DATE 9 JAN 2012


NACT

Thanks
 
Move the TRN to key 3 and then add another MCR 4750 to key 2.
PDL123
 
I added a second MCR 4750 key to it. It says the MARP is on key 1:

KEY 00 SCR 4766 0 MARP
CPND
NAME LAC DDX station 1
XPLN 27
DISPLAY_FMT FIRST,LAST
01 MCR 4750 0 MARP
02
03 MCR 4750 0
04 RNP
05 TRN
06
07

If I now nul key 1 will the MARP move to key 3? It is just that 4750 rings on 8 or so other phones and is MARP'd on this set so I don't want to break it.
 
MCR is a multiple-call ring therefore when 4750 is called all phones with x4750 ring, one person answers that call all other keys go dark waiting for another call. I don't think Marp comes into play in this senario.

PDL123
 
Thanks, that got it working. I put SCR for the actual extension on key 0 then non-DIDs for keys 1 and 2. Moving the MCR 4750 to another key didn't hurt anything. Thanks.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top