Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I find the packages loaded on an M1? 1

Status
Not open for further replies.

brgf11

Technical User
Feb 19, 2004
59
GB
Hi all,

We have a customer who wants a 'door set'.
Apparently this feature is available in package 86.
How do I find what packages are loaded on their Meridian?

Thanks

Jimbo
 
Sorry for lack of detailed info.... This is for Multi tenant service(TENS).
They want 1 phone/DN to only be diallable from specified DNs. All other DNs would be barred access.

Thanks

Jimbo
 
not without a pri tie between tenants, if you allow ten to ten, it's a system prompt. if you have to do that, build a pri to pri interface between tennets, then add cdp/dsc's with a frl high enough to allow just those dn's to the remote tennant. the package you listed might do that, but without it, i've done it by using a dual pri, one trunk group for each tenant.

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top