How do I find the IP Address of 8300, VOIP, P330 on G700?

[oscar01]

I can see what the MGP IP Address is of the G700 from the 8730s I have and can get into the browser and telnet using root. How can I find out what the P330, 8300, and VOIP IP addresses are in this gateway? (I'm having to assign all my IP Addresses a DNS name and want to be accurate) Thanks

 

[SF0751]

I know that you can use the command "show voip".... not sure about the others.

Susan
"An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you do know and what you don't."
- Anatole France

 

[SF0751]

In addition, if you use the command "show mgc" (while in "config" mode), the last entry *should* be the 8300 address.

Susan
"An education isn't how much you have committed to memory, or even how much you know. It's being able to differentiate between what you do know and what you don't."
- Anatole France

 

[oscar01]

Perfect thanks Susan!

 

[ONsiteengineer]

Try this..

In the console port. command is:

in p330-- show interface
in mg-???-1--show interface mgp and show interface voip!

 

[ken07734]

I believe you can use the command "tree" to get a list of all valid commands.

 

[Bahamian1977]

This might be useful for you as well:

http://jaymzworld.com/w/images/8/89/S8300-Cheat-Sheet.pdf