How do i find out what NCOS levels are set to 1

[AC427]

Hi,

This is probably an easy thing, but can someone tell me how to see what NCOS levels have been set as. I have just taken over some option 11`s and need to find out what each NCOS level is programmed as.

Thanks

 

[bigindian65]

prt your ESN in ld 86

 

[bigindian65]

If you want to see who has what, you can LST ncos in 87 one at a time to look for certain standards and match them with npa nxx spn, and rli's.

 

[acewarlock]

LD 87 PRT NCTL, this will list all NCOS/FRL info.

LD 81 lst FEAT NCOS, this will list the NCOS of every phone.

Why change the engine if all you need is to change the spark plugs.

 

[sidvic]

Try this:


>LD 49
DGT000
MEM AVAIL: (U/P): 23394173 USED U P: 4945516 234003 TOT: 28573692
DISK SPACE NEEDED: 366 KBYTES
2MB BACKUP DISKETTE(S) NEEDED: 1 (PROJECTED LD43 - BKO)
REQ prt
TYPE fcr
CUST 0
CRNO

CRNO 0
INIT ALOW

CRNO 1
INIT DENY
ALOW 112
999

CRNO 2
INIT DENY
ALOW 112
144
151
152
154
150
999
0321
0500
0800

CRNO 3
INIT ALOW
DENY 1
ALOW 112
123
144
151
152
154
150
161
162
DENY 0
ALOW 013991
013996
013997
013998
013999
013990
014262
014269
0171
0181
018939
0321
0345
0500
0645
0845
0800
00
DENY 00353

CRNO 4
INIT ALOW
DENY 141
153
155
033
037
ALOW 03745
DENY 0385
0390
0411
0410
0421
0441
04481
04561
04560
04624
0467
0468
0401
0402
0408
0541
ALOW 05415
DENY 0585
0589
0632
0640
0660
0696
0774
ALOW 07740
DENY 07017
07010
07020
07050
07060
07001
07002
07000
0831
0836
ALOW 08361
08369
DENY 0839
0853
0850
0860
0881
089
0802
0910
0930
0956
0958
097
099
ALOW 0990

CRNO 5
INIT ALOW
DENY 141
153
155
033
0541
ALOW 05415
DENY 0632
0640
0660
0696
08364
0839
0853
0881
089
0930
099
ALOW 0990
DENY 090
00

CRNO 6
INIT ALOW
DENY 141
033
0541
ALOW 05415
DENY 0632
0640
0660
0696
08364
0839
0853
0881
089
0930
099
ALOW 0990
DENY 090

CRNO 7
INIT ALOW
DENY 0541
ALOW 05415
DENY 0632
0640
0660
0696
08364
0853
0881
089
0930
099
ALOW 0990
DENY 090
ALOW 09063420342

CRNO 8
INIT DENY
ALOW 01893

CRNO 9

CRNO 10

CRNO 11

CRNO 12

CRNO 13

CRNO 14

CRNO 15

CRNO 16

CRNO 17

CRNO 18

CRNO 19

MEM AVAIL: (U/P): 23394173 USED U P: 4945516 234003 TOT: 28573692
DISK SPACE NEEDED: 366 KBYTES
2MB BACKUP DISKETTE(S) NREQ

 

[sidvic]

The CRNO number = NCOS number

 

[AC427]

thanks sidvic, just what i needed

 

[johnpoole]

ld 49 is great IF you used 9 as an acod.. if not look at nctl translation in ld 87.. frl 0 equals ncos 0 thru 7 equals 7 (usually) then in route 86 each entry on the rlb assigns a frl..

so if i send 1213 to route list block 1, entry 1, point that to my ld carrier with a frl of 4, you need an ncos of 4 to make that call...

stateside almost no one touches ld 49 for anything except idc.. we have an overhead page that uses acod for access. i had to default an allow table to use the zones past the acod

john poole
bellsouth business
columbia,sc