Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I find out what Med pro/ CLan card version? 2
- Thread starter acuratsx
- Start date
-
1
- #2
namesrhard2pick
Technical User
Hi,
Do a "list configuration all" Find the board number of your CLAN and Medpro and look under the column labeled vintage. You will see a HW (hardware) and FW (firmware)
Do a "list configuration all" Find the board number of your CLAN and Medpro and look under the column labeled vintage. You will see a HW (hardware) and FW (firmware)
- Thread starter
- #3
-
1
- #4
Phonemanrwj
Technical User
If for whatever reason you do not see the HW and the FW,
just look at the physical location of the board itself.
This information should be on the label on the side of the
circuit pack.
just look at the physical location of the board itself.
This information should be on the label on the side of the
circuit pack.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Question