How do I change the names on our Neax 2000 IPV system?

[MeridianSchool]

Hello. Our system is a dual Neax 2000 IPV box with Dterm Series E NEC phones. We changed some staff members this year and called out a phone guy to move the punch down wires so the extensions would move, but I need to change the names on those extensions to match the staff members new name.

From the research I have done, I think I need a cable and a MAT software for a PC? Is there no way to program this from the phone? I have no cables or software as of now, and the phone guys were not very motivated in doing this programming for us. I am a technology coordinator but I have never done a phone system like this. Basically I need the start from scratch walk through of what I need and how I would do it.

Thanks

 

[MeridianSchool]

I am sorry, I want to correct what I said. We have a 2000 IVS no an IPV. Sorry if that confused anybody.

 

[MeridianSchool]

I found it in the FAQ on how to change the name. Luckily I could do it through the phone! On this system can everything be programmed through the phone or should I still look into getting a cable and programming it with a computer?

My next step is to figure out how to do group calling, so that the phone rings on both our secretaries phones at the same time. Any tips on that?

Thanks

 

[OzzieGeorge]

Ok

yes everything can be done from a Dterm.

The way to make a line ring on multiple phones is to add a line appearance to the phones and that is done in Cmd 90YY

I would suggest you download a copy of the command manual and the feature programming manual from

http://www.wedophones.com

 

[neax]

Command 770 or 771.