How do I change the LAN IP address on AVAYA ip406

[bryera]

I have a customer with 3 sites and they want A VPN between the 3 of them. I have successfully created the VPN between 2 of them. However the 3rd one requires the LAN subnet changing.

Site 1 - 192.168.0.xx
Site 2 – 192.168.1.xx

Site 3 currently has the same subnet as Site 2. When I change the subnet on the router from 192.168.1.xx to 192.168.2.xx the IP406 does not work.

Does anyone know how to change the ip address of the IP406 when changing the LAN?

 

[kwing112000]

You need to get into the software and do it there. you may want to call your BP to do this. you also have to make sure you get the IP Route correct

Kevin Wing
ACA- Implement IP Office
Carousel Industries

 

[bryera]

I am using IP office manager, I was just wondering how I go about it. I have amended many configs although its the first time I have needed to change the IP Address.

 

[kwing112000]

You have to go under the system tab and then LAN1. then you have to change the IP routes. After this you will need to reboot.

Kevin Wing
ACA- Implement IP Office
Carousel Industries