easybigguy
MIS
Recent reprogramming resulted in 2 intercom lines. Prior to this we had only one. I would like to change it back to one. Can anyone help?
Thanks,
BigGuy
Thanks,
BigGuy
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I change from 2 intercom lines to 1. 2
- Thread starter easybigguy
- Start date
- Status
-
2
- #2
Feature**266344
Password: 266344
"Terminal and Sets" Press show
"Show Set" enter ext.number
press show
"Line Access"
press show
"Line Assignment" press next 3times
at "Intercom keys" press change until it says the amount of intercom keys you want for thi ext.
repeat for each set you want to change.
Password: 266344
"Terminal and Sets" Press show
"Show Set" enter ext.number
press show
"Line Access"
press show
"Line Assignment" press next 3times
at "Intercom keys" press change until it says the amount of intercom keys you want for thi ext.
repeat for each set you want to change.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
