How do I change default class of service

[albiej]

I have a 250 and when setting up new mail boxes through the WYSE terminal, by default it picks the class 1 mailbox (small) which has been ok till now.

The powers to be now wants new m/b builds to automatically pick the class 2 (Medium) as the default . In other words, how can I do this without physically keystroking the class 1 to a 2 every time a mail box is built?

 

[KenMeans]

You can't unless you use MBM or a procomm script. You can also hard code a F key on the Wyse terminal to change it.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[albiej]

Thanks,
What would hard coding an f key accomplish? Is this like a macro that brings you to the class of svc prompt and applies the change to make it class 2, thus eliminating keystrokes?

 

[KenMeans]

yes

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[albiej]

Thanks again.

Presently, my cos 1,2 and 3 have max 30, 40 and 60 messages.
If I increase class 1 to 40 messages in the class of svc profile,(Menu 7) I take it that only future mailbox additions will have the 40 max messages, and the existing boxes will not be changed to the new value. Is this correct Ken?

 

[KenMeans]

No if you change it all mailboxes will then be able to have 40 in them

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[albiej]

So, to clarify, do you mean that if I change the class 1 max boxes in Menu 7 to 40max that I will do a global change to the 500 boxes that are in the system or just the new ones that are built under the new 40 template?

thanks

 

[KenMeans]

yes

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)