how do I change codes

[chansel77]

Right now we have to dial 26, Pin number,98, 10 digit number to dial long distance. I am wanting to change the 26 part due to having to change our prefix to 266. Can anyone point me in the right direction to change this? Thanks in advance.

 

[GHTROUT]

We assume you are on a Meridian/CS1000

Let's define what 26 is first.

LD 20
REQ PRT
TYPE DNB
DN 26

If it is not there, then start studying LD88


--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[bigindian65]

try prt cdp in 87

Mato' Was'aka

 

[chansel77]

I have tried to print DN for 26 and recieved no activity message. I have also printed the CDP but cant find where the 26 comes into play.

 

[GHTROUT]

If the first thing you dial is 26, and I mean "Lift Handset, dial 26" and you cannot print it out, then you are not entering the correct syntax somewhere. Try printing out just "2"

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[chansel77]

Okay I am now getting type SFP when I print dnb and enter 2. Now just the matter of finding what SFP is. Thanks for helping.

 

[GHTROUT]

SPRE Code

[SPRE] + 6 Authorization Code Access

Or, 26 in your case.

You must change your "2" to something else. Here is a list of all the default SPRE codes:

http://www.ghtrout.com/ghtrout/files/SPRE.html

You cannot change the codes after the SPRE, you can only create new ones. But you can change the SPRE. You want to study up on Flexible Feature Codes - it's in the Feature Guide

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[GHTROUT]

PS: The SPRE code is printed in LD21 and changed in LD15. Do a PDF search on "SPRE" in the LD15 books. My books are the easiest to navigate

http://www.ghtrout.com/micromerl/index.html

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[chansel77]

Great. Thank you.