Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How create Telephone 3904 ACD Supervisor

Status
Not open for further replies.

Crosy

Technical User
Jul 14, 2006
6
VE

Dear Sir:
How may I create a Telephone 3904 with ACD, I try to copy the programation of an excisting phone but, I get an error as follos: ERR SCH3306 "The Source TN cannot be an ACD Supervisor Severety: Info", and documentation confirm that it cannot be created. Then I try to create a new one, but it has parameters that the exist phone has that I really do no know to include in my new phone supervisor.

Please check the explanation belong in order to explain myselve better.

DES XXXX
TN 034 0 00 00
TYPE 3904
CDEN 8D
CUST 0
FDN 7100
TGAR 1
LDN 0
NCOS 0
SGRP 0
RNPG 1
SCI 0
SSU
LNRS 16
XLST
SCPW
SFLT NO
CAC_MFC 0
CLS
CTD FBD WTA LPR PUA MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD DOS XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDA CFXA ARHD FITD CNTD CLTA ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD
UDI RCC HBTD AHA IPND DDGA NAMA MIND PRSD NRWD NRCD NROD
DRDD EXR0
USMD USRD ULAD CCBD RTDD RBDD RBHD PGND OCBD FLXD FTTC
DNDY DNO3 MCBN
FDSD NOVD OUSD OBPD CDMR
CPND_LANG ENG
RCO 0
HUNT 7100
LHK 2
PLEV 02
CSDN
AST

*HOW CAN I PROGRAM THIS PART IN MY NEW SUPERVISOR PHONE.*

IAPG 1
AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12
FCTB 1
*

ITNA NO
DGRP
PRI 01
MLWU_LANG 0
MLNG ENG
DNDR 0

** HOW MAY I ASSIGN ACD IN KEY 00 TO THE NEW PHONE SUPERVISOR.**

KEY 00 ACD 3400 0 2017
SPV

01 SCR XXXX 0 MARP
CPND
CPND_LANG ROMAN
NAME XXXXXXXX
XPLN 24
DISPLAY_FMT FIRST,LAST
02 SCR XXXX 0 MARP
CPND
CPND_LANG ROMAN
NAME XXXXXXXX
XPLN 24
DISPLAY_FMT FIRST,LAST
03 DWC 3400
04 NRD
05 MSB
06 OBV
07 AAG
08 ADL 16
09 ADL 16
10 ADL 16
11 ADL 16
12
13
14
15
16 MWK 7100
17 TRN
18 AO6
19 CFW 16
20 RGA
21 PRK
22 RNP
23
24 PRS
25 CHG
26 CPN
27 CLT
28 RLT
29
30
31
DATE 16 MAY 2006
 
never copy a acd phone, build it from scratch, put spv in the cls and it will know it's a spv set
 
You cannot program this part as it occurs when the set is "acquired" by the Symposium.

AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12

To make an ACD set, put SPV in the CLS;

The KEY 0 ACD nnnn 0 pppp
where nnnn=ACD queue number
pppp=position number for ACD set
The 0 in between th ACD queue number and position number is the CLID table number.
 
ACCORDING TO THE NTP'S YOU CAN COPY A AGENTS PHONE BUT NOT A SUPERVISORS. WHEN YOU GO TO COPY AGENTS, THERE WILL BE A PROMPT AFTER THE DN FOR THE POSTION ID

OLD ROLMEN WORKING ON NORTELS
 
You can copy, but it is not the preferred way of doing it. It is better to build it as a "new". Especially when there are agents being linked to a supervisor as that is where the corruption comes in.
 
ACCORDING TO THE NTP'S YOU CAN COPY A AGENTS PHONE BUT NOT A SUPERVISORS. WHEN YOU GO TO COPY AGENTS, THERE WILL BE A PROMPT AFTER THE DN FOR THE POSTION ID

one of the few things i disagree with perry on, according to nortel level four tech support, if you copy that set, and it corrupts your database, they will not help you retype the database. if someone in my switchroom did a copy on an acquired acd set, the 1st thing i would do "after" i got dialtone back would be to delete his password.. i can't hire or fire, but i do control access.. i do not allow changes or copy on acd phones.. you can save ten minutes, but you can look real foolish when the switch ini's 5 times before it does a cold restart, and then can't find an os

john poole
bellsouth business
columbia,sc
 
Hi
I highly appreciate your help.
Thank you so much

The key 0 acd etc, ready


How may I add this part (Symposium) in my new supervisor phone

AACS YES
ACQ AS: TN
ASID 16
SFNB 2 5 6 9 10 11 12 13 15 16 17 18 19
SFRB 1 2 15
USFB 1 3 4 5 6 7 9 10 12 13 14 15
CALB 1 3 4 5 6 8 9 10 11 12

I would like to know how can I do to have two supervisors in a call center team with the telephone 3905 of an agent ( do I have to make a relation with SPID wich correspond ID supervisor, (can I add it to other supervisor, or I just have to indicae KEY 0 ACD nnnnn 0 SPV

These work to check agents calls?
 
That part is done by Symposium
After it is programmed go into Symposium Client, Switch Admin, phonesets and aqquire the phone. That is where it gets all that info.I agree never tried to change an aqquired phone and never copy a ACD phone.
 
The ACD Phone must be De-Aquired in the Server before you do anything.

You DO NOT Copy ACD Phones, if you do you my corrupt your Data Base, that is already a fact.

Even if you do a simple change, Print the Phone, Out the Phone and Rebuild the ACD Phone with the change after the ACD Phone is De-Acquired.

If you add a Supervisor to the Class of Service you wont see it unti you print the Phone.

After you rebuild the phone double check you programming and then Re-Aquire the ACD Phone.

Good Luck,

L.A.CityTech
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top