How can I use "Cilcod" into an Abbreviate in BC9?

[HeGA]

I'm using authorization codes to let people talk Long Distance and Cellular calls. To check who make the call, I use a "cilcod" parameter.
Now we're using abbreviates to let some to do this, but when I try to find who's who, I can't.
How can I put a "Cilcod parameter" o an authorization code into the abbreviate?
I try to use this:
ADCOI:ABB=xxxx,TRA=A75AcilcodB00121245572133,CLASS=0&&3
but it doesn't work 'cause "A" is not recognize

 

[neryga]

well, the authorization code how you say, have two parts:
auth and cilcod and you program that on the system with a command like this

Aucoi:Auth=1111,cilcod=2222,cat=6,check=no;

so, if you want to use these authorization codes in an Abb, you have to do some thing like this

Adcoi:abb=xxxx,tra=A72A1111B00121245572133,CLASS=0&&3;

how you can see, you have to use the Auth, no the Cilcod.

"A" is recognize

 

[vjimeneztenas]

you can do what neryga say only if you are going to dial the ABB from an internal extension, if you want to do it from a trunk the "A" is not going to be recognized because the "A" is used for "Extension Facilities" (extensions, not trunks)

 

[HeGA]

Thanks neryga, but there's something about this:
If I use it, any people who use a digital phone will know the autorizathion code, so then he can use it to call anywhere he want.
I appreciatte youy help.
Thanks.

 

[HeGA]

I still needing this solution.
Otherwise, if anyone of you can help tell me please.
The situation:
There're a lot of people in the factory where I work whit cellular phones.
To call them (and to log distance call)we use autorizathion codes.
But now is a new "moda" (Sorry, I'm from Mexico) here use ABB, so, all the control we had was losted because we can control (and bill) the calls using this.
That's the reason why I want to use of "Cilcod" inside the ABB. Other way I have to search ext for ext, what ext make call (1,680 aprox), who the ABB belong and his cost center.
Thanks a lot for your help.

 

[Hitechbuzz]

Can you use your call accounting package? I use Tabs & have put a Z into gen 3 this covers trunk to trunk calls and caller ID goes into Gen Field 1 & tells me where the i/call came from.
The MD puts out the Z for a Trunk to Trunk call
Cheers

 

[HeGA]

Hi Hitechbuzz, I'm using TABS Call Accounting System and this gave me a partial solution because I can handle some filters and find the "destiny extension" or better said the ABB. But there are a lot of ABB here (308) and aprox 6500 dialy calls. I have to run various process to cover it all.
So, I think if I use a cilcod into the ABB (BC11 let do it, but I cant find the way in BC9) I can do this so simply like one query...
Thanks.