How Can I Set DMC8 To The Factory Default?

[yalcinataseverr]

Hi all

I forgat the ip of DMC8 card. And Now i have to set it to the factory default (192.168.1.1)How can i do this?

Thanks.

 

[yalcinataseverr]

any one?

 

[Wane47]

this is from the manual, it's on line at

http://www.nortel.com

1 Open the Telnet dialog box.
Click Start on the Windows taskbar and choose Accessories >
Telnet.

2 Enter username and password.
Type username dasuser and password dasuser.

3 When the connection prompt local appears, change the DMC8
Relay card address.
Enter the following command:

ipconfig xxx.xxx.xxx.xxx yyy.yyy.yyy.yyy zzz.zzz.zzz
.zzz
xxx.xxx.xxx.xxx = new IP address of the DMC8 Relay card.
yyy.yyy.yyy.yyy = subnet mask, usually 255.255.255.0
zzz.zzz.zzz.zzz = IP address if this is the gateway for the
network.
Note: zzz.zzz.zzz.zzz must be set to the IP address of
the OTM server Ethernet interface. If there are two Ethernet
interfaces on the OTM server, zzz.zzz.zzz.zzz must be set
to the IP address of the interface that is on the same network as
the DMC8 Relay card.
—End—


Nortel Communication Server 1000
DECT Fundamentals
NN43120-114 01.09 Standard
Release 5.0 30 October 2009
Copyright © 2003–2009, Nortel Networks
.

 

[Firebird Scrambler]

The only way to recover the IP address is via a serial port connection.

I learned this on my course many moons ago. I'll see if I can get it uploaded for you.



All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[yalcinataseverr]

I have to connect DMC8 from serial port. any one know how can i do this? Any Pin outs for it?

 

[Firebird Scrambler]

Try this link below and let me know if it works OK please?

http://www.ghtrout.com/ghtrout/files/DECT_Serial_Connection_Procedure.zip

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[yalcinataseverr]

oh my friend you are WODERFULL...

THANKS.

ill try and back to you