Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How can i remove group of ACD from Nortel Cs1000

Status
Not open for further replies.

SijuM

Systems Engineer
Nov 9, 2021
2
SE
Hi,

What is the command for removing the ACD from Cs1000.
I went to LD 23 >out >ACD> cust 0> and giving ACD getting error as SCH0707.

Suggession please

DN 92440
TYPE ACDN
ACID 92434 TN 248 1 15 02
ACID 92441 TN 208 0 09 00
ACID 92442 TN 208 0 09 01
ACID 92443 TN 208 0 09 02
ACID 92448 TN 208 0 09 03
ACID 92436 TN 248 1 15 03

I want to make the DN 92440 as phantom 500 number.

rgds
 
You will have to out those phones before you out the ACD Que
 
which remote commands helps to out the phone and then ACD.
Can you guide me ?
 
It depends if they are contact centre or Voice recorded users and are in an acquired state. If they were then when you print the TN you would see that, if they are then de-acquire and remove them at the application first.

remove the phones

LD20
REQ out
TYPE <phone type>
TN 248 1 15 02 <--first one as an example

once all sets are gone

LD 23
REQ out
TYPE acd
CUST 0
ACDN 92440
 
If you have a AACC, i believe AAQ or something to that affect will be there and it will say yes for acquired. YOu'd need to de acquire those. Everything Bignose21 said is correct
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top