How can i put Static ip adresss 5302 IP Phone

[carlosdamuz]

I have 3 3300 icp Controllers with ip networking conection but the 5302 ip phones are programmed in several 3300 controllers that their are conected via ip networking an only one controller has to have dhcp activated,

 

[tlpeter]

You can't, you need dhcp for the 5302

ACS - Implement IP Office
ACA - Implement IP Telephony -- ACA - Design IP Telephony
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!

 

[carlosdamuz]

saw what cant i do if y have program 4 5302 ip telephones in 1 controller and 4 ip 5302 in another controler if only one controller can have the dhcp activated how can i make the 5302 can sing in his own controller. with the dhcp desactivated.

 

[paterson]

Each phone has a unique MAC address. You can use that to your advantage here by programming the DHCP to hand out static IP addresses complete with specific DHCP options.

Program the static entry in the appropriate form. Then in DHCP options, create new options and assign to the static entry you just created.

_______________________________________________________________

If you did not take enough time to get it right the first time...

What makes you think that you have time to fix it?

 

[Mitelpassion]

or you can split the network and use DHCP helper or DHCP relay agents. this will allow you to specify DHCP options specific to your respective IP networks

 

[kwbMitel]

Assuming that you have good reasons to enable DHCP in only 1 controller.

Also assuming that all your 5203's are able to obtain an address from same controller.

Also assuming your 3300's are networked properly.

Option 1:
Static reservations can be set up in the DHCP controller that are specific to the set and directs the set to it's primary controller for call control.

Option 2:
Make sure the 5302's on the remote systems are properly configured in the Remote Directory form of the DHCP controller. Use the PIN registration method to register the phone and the DHCP server will handoff the registration to the appropriate controller.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[Canuckvoip]

Those phones are a pain the ...
We won't sell them anymore. They take too much effort to configure in certain situations (as this post confirms). It is stupid that when you dial a number, you either have to wait for the call to be completed or dial # to send it right away.
The extra time and effort is not worth it compared with the cost of a 5304.

Dave

You can't believe anything you read... unless of course it's this.

 

[Mitelpassion]

kwbmitel,

didn't even think of doing that with a 5302 phone.

canuckvoip - I second that, don't like those phones at all.