Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How calls flow to IX Attendant

Status
Not open for further replies.

salert

Programmer
Sep 19, 2007
35
CA
Hi Was wondering if anyone could point me in the right direction, we have been hit with spam calls and I have been asked to put a menu in front of our main number which in the trace is 4422. I can't find where these digits get converted though. normally I use the change inc-call-handling-trmt trun 201 command but this is to an IX Attendant and I'm a bit lost. Below is the call trace:

17:52:14 Calling party trunk-group 201 member 30 cid 0x2a43
17:52:14 Calling Number & Name 6478576554 NO-CPName
17:52:14 active trunk-group 201 member 30 cid 0x2a43
17:52:14 dial 4422 route:UDP|AAR
17:52:14 term trunk-group 501 cid 0x2a43
17:52:14 calltype 4422# match=4422
17:52:14 calltype 7599900 call_type UDP,loc=10,match=7599
17:52:14 route-pattern trunk-group 501 preference 172 location 10 cid 0x2a43
17:52:14 seize trunk-group 501 member 172 cid 0x2a43
17:52:14 Calling Number & Name 6478576554 NO-CPName
17:52:14 SIP>INVITE sips:7599900@he.bell.ca SIP/2.0
 
Looks like 4422 is in the uniform dialplan table. You can manipulate where it routes using that table and you can point it to your voicemail pilot number that way.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top