How active remote forward? 1

[badboy2006]

I need to activate remote forward in a Meridian Option 81c Release: Succession 4.5.

 

[badboy2006]

forward is between two telephones of different meridian connected.

 

[jamie2]

1. Setup your SCPW on the sets. We use 1234.
2. Go to LD 57 and program your FFC's for RCFA and RCFD.
Our RCFA = **11 and RCFD = ##11
3. From you set dial RCFA Code + SCPW code + DN you want to forward + Destination DN + POUND#
4. To cancel, from your set dial; RCFD code + SCPW code + DN you want to unforward + POUND#

My example would be **11+1234+2980+2973+#. This would forward 2980 to 2973.

 

[badboy2006]

thanks.

But,is forward between two connected telephones of different Meridian with connections PRI. I need to program a key that forward between two telephones makes of different they meridian.

 

[Utreg]

If I translate you rightly there should be also on the set:
CLS CFXA
and probably adjust the CallFoWard lenght

 

[M1PBXtech]

Here is a cool Excel sheet (from ghtrout.com) that makes a instruction card for the end user.

URL:

http://www.ghtrout.com/ghtrout/files/RCF_UserCodeCalc.zip

 

[jamie2]

Yes, Badboy, the 'internal' remote call forward instructions will work between networked switches. I can forward any of our numerous other switches from the 81C I sit at over our PRI ties.