Hotline 1

[badsushi]

I used to use a user shotcode of:

?D
dialextn
*99


*99 = shotcodes for voicemail modules that works...

after upgrading from 3.2 to 4.0 this code no longer works for me says: Call Rejected

here is the sysmonitor
361031mS CMExtnRx: v=1000, p1=0
CMSetup
Line: type=DigitalExtn 3 Call: lid=0 id=1022 in=0
Called[] Type=Default (100) Reason=CMDRdirect Calling[1000] Type=Internal Plan=Default
BC: CMTC=Speech CMTM=Circuit CMTR=64 CMST=Default CMU1=ULaw
IE CMIECallingPartyName (110) Receptionist
361032mS CMTARGET: 0.1022.0 11 Receptionist.0: LOOKUP CALL ROUTE: type=100 called_party= sub= calling=1000 in=0 complete=0
361032mS CMTARGET: SKIP INCOMING CALL ROUTE
361033mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number= type=100 depth=1 nobar=1 setorig=1
361033mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: 0 sc=type=69 code=?D, num=*99
361034mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=2 nobar=1 setorig=1
361034mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361034mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361035mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=3 nobar=1 setorig=1
361035mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361036mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361036mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=4 nobar=1 setorig=1
361037mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361037mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361038mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=5 nobar=1 setorig=1
361038mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361038mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361039mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=6 nobar=1 setorig=1
361039mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361040mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361040mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=7 nobar=1 setorig=1
361040mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361041mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361041mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=8 nobar=1 setorig=1
361042mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361042mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361043mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=9 nobar=1 setorig=1
361043mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361044mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361044mS CMTARGET: 0.1022.0 11 Receptionist.0: ADD TARGET (N): number=*99 type=100 depth=10 nobar=1 setorig=1
361044mS CMTARGET: 0.1022.0 11 Receptionist.0: FoundKnownSystemTargets *99
361045mS CMTARGET: 0.1022.0 11 Receptionist.0: USER SC: *99 0 sc=type=69 code=?D, num=*99
361045mS ERR: CMCall:epth/Nest Limit Exceeded
361046mS CMTARGET: 0.1022.0 11 Receptionist.0: CancelTimer CMTCDialToneTimeout
361047mS CMLOGGING: CALL:2008/02/2313:17,00:00:00,000,1000,O,,,Receptionist,,,1,,""n/a,0
361047mS CD: CALL: 0.1022.0 State=0 Cut=0 Music=0.0 Aend="Receptionist(1000)" (1.3) Bend="" [] (0.0) CalledNum= () CallingNum=1000 (Receptionist) Internal=1 Time=19 AState=7
361048mS CD: CALL: 0.1022.0 Deleted
361049mS CMExtnTx: v=1000, p1=0
CMSetupAck

Any Ideas please??? I see the call bar 1 that doesnt look good???

 

[kwing112000]

Try doing this

?D
Voicemail collect
"Module Name"
TN 0

 

[badsushi]

I swear I tried that last night but... Works Now

Thank you Sir..

Can i shoot one more at you??? It's worth another Star

also used to use user short codes to send out caller ID

[9]N;
Ns2135551212
dial3k1
0

Im sure its cause of ARS/LCR addition - can you help me?

 

[Bas1234]

Or use ,,, for a pause.

Like so ?,,,,D

And the rest like Kwing said.

googd luck

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

Sorry but that option won't work, you could try that in the Phone number field.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[Bas1234]

This is how the user ShortCodes work.

The following rules are used when short code matching is performed for user dialing:

A short code is used immediately an exact match is found unless followed by a ;.

• If no match is found but partial matches exist, the user can continue dialing.

• If no match or partial matches are found, incompatible is returned.

• The following precedence is used to determine which short codes are used:

• Extension number matches override all short codes.

• User short codes override user rights and system short codes.

• User Rights short code matches override system short codes.

• When multiple exact matches occur,

• The match with the most specified digits rather than wildcards is used.

• If there are still more than one match, the match with the most exact length is used. This means X wildcards will override N when both match.

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________

 

[kwing112000]

I would do the caller ID in the ARS patterns. Not on the 9N short code. You can also try Nsixxxxxxxxxx. I see you are NY and Verizon sometimes needs the si. Also if you want DID caller id use 10 digits on your incoming call routes and it will use if for outgoing. you can also have the i there if needed.