Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Hoot system through Nortel 61c 1

Status
Not open for further replies.

Benho

Technical User
Sep 5, 2006
37
US
Here goes customer wants existing hoot system to go through 61c in NYC out to Boston nortel 11c over the phones or existing speakers . Any suggestions ?
 
What is a HOOT System, do you mean a paging system?

Once we know what a hoot system is we might be able to help.
also tell us how it work now.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Not going to happen over the speakers.

The hoot system is a Hoot-N-Holler that when someone keys the Mic the voice goes out over all speakers connected to this system. Traders like Merill Lynch use these all the time to make stock trading and tendencies announcements to all the traders at one time.
 
I just wanted to make sure that's what he meant and not something else. I try never to (ASS-U-ME)




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
That is correct Hoot n Hollar system for traders they are looking into enhancing the PBX systems
 
and tnphoneman could you explain why it's a no go ? Thanks
 
It could be done over a paging system but not over the speakers in the phones.




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
I have been corrected ring dial intercom system not a hoot or paging system.
 
Ok, lets make sure were all talking about the same thing and not makingg Assumptions.

what is a ring dial intercom in your mind, I know what it is in my systems and how does it work on yours?




This is a Signature and not part of the answer, it appears on every reply.

This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
There is no way to make an external source page over the speakers on the phone sets. Even internally you can not page over the speakers on TDM type sets if you are on a PBX. The only thing that pages over the speaker on a PBX is IP sets and you have to have an Application Gateway server to do that.
 
This is a seperate Ring dial system ( Ring-Masters) outside the Nortel. And we want to know if we can incorpate the the system through the Nortel ? and if so would like to know what equipment wouldbe involved on both the 61c & 11c? I know it's crazy but, thanks .
 
Sorry but once again not over the set speakers. I don't think even an Norstar would page without DISA from an external source.

Signature===========================================
Artificial Intelligence Is No Match for Natural Stupidity.

The latest survey shows that 3 out of 4 people make up 75% of the population.

The original point and click interface was a Smith & Wesson.

Red meat is not bad for you, it is the green fuzzy meat that is bad.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top